EchoStar dsb-808 2ci Manuale Utente
Section 4
Page 4 - 8
EchoStar International Corporation
©
2
2
001
E
c
hoS
tar
Inte
rnati
rnati
o
nal
C
o
rp
orat
io
n
A
ll
rig
hts
re
s
erved
2.5. ABOUT ECHOSTAR
The About EchoStar menu gives all the where-to-contact-Information about EchoStar and the
status information about the receiver. You can view:
status information about the receiver. You can view:
2.6. SYSTEM UPGRADE PAGE
This menu page allows you to upgrade the receiver’s software. EchoStar provides software
updates Over-The-Air (OTA) which means that you can upgrade your system via the satellite.
updates Over-The-Air (OTA) which means that you can upgrade your system via the satellite.
If you are not able to receive the satellite/transponder, you always can upgrade the software
through the SERIAL PORT (RS232) at the rear of the receiver and the downloaded software
from the EchoStar website.
through the SERIAL PORT (RS232) at the rear of the receiver and the downloaded software
from the EchoStar website.
2.7. FACTORY RESET
The Factory Reset menu gives you the possibility to reset the receiver to the initial factory
settings. The memory erase option restores the factory settings over your personal settings.
All customized data like parental lock and favorites will be replaced with the factory settings.
settings. The memory erase option restores the factory settings over your personal settings.
All customized data like parental lock and favorites will be replaced with the factory settings.
■
Company, this field shows the full name of
EchoStar.
EchoStar.
■
Address, this field shows the address of EchoStar.
■
S/W version, this field shows the current software
version loaded into the receiver.
version loaded into the receiver.
■
Boot version, this field shows the current boot
version loaded into the receiver.
version loaded into the receiver.
■
Web site, this field shows the EchoStar web site
where you can find the latest user and software
information.
where you can find the latest user and software
information.
■
Location
To select the default or user defined satellite where
you want to download from.
To select the default or user defined satellite where
you want to download from.
■
Satellite
To set the satellite where you want to download
from.
To set the satellite where you want to download
from.
■
TP frequency
To set the transponder where you want to download
from.
To set the transponder where you want to download
from.
■
Polarity
To set the correct polarity for the transponder.
To set the correct polarity for the transponder.
■
Symbol rate
To set the correct symbol rate for the transponder.
To set the correct symbol rate for the transponder.
■
FEC
To set the correct Forward Error Correction for the
transponder
To set the correct Forward Error Correction for the
transponder
■
Memory Erase - User Data
To instruct the receiver to delete all personal
settings and replace them with the factory settings.
To instruct the receiver to delete all personal
settings and replace them with the factory settings.
■
Confirm Reset
With this field you can confirm the selections made
and execute the selected procedure. After the
memory erase procedure is finished, you are taken
to the initial setup procedure. (for detailed
instructions, please refer to section Installation).
With this field you can confirm the selections made
and execute the selected procedure. After the
memory erase procedure is finished, you are taken
to the initial setup procedure. (for detailed
instructions, please refer to section Installation).