EchoStar dsb-2110 2ci Manuale Utente
ANT IN
TV OUT
VIDEO
AUDIO
DO NOT PLUG the receiver into Main Power Outlet, until you complete all the connections to the receiver.
DO NOT PLUG the receiver into Main Power Outlet, until you complete all the connections to the receiver.
5. Getting Started
TV ANTENNA
TV
RF IN
6
Receiver to TV with RF
VCR
TV
RF IN
RF IN
RF OUT
Receiver to VCR and then to TV with RF
1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar DSB-2110 2CI.
2. Connect the TV OUT socket of the EchoStar DSB-2110 2CI to the RF IN of the TV set.
3. Search on the TV set for UHF channel # 38. This is the default channel where the EchoStar DSB-2110 2CI is set to.
2. Connect the TV OUT socket of the EchoStar DSB-2110 2CI to the RF IN of the TV set.
3. Search on the TV set for UHF channel # 38. This is the default channel where the EchoStar DSB-2110 2CI is set to.
1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar DSB-2110 2CI.
2. Connect the TV OUT socket of the EchoStar DSB-2110 2CI with the RF IN of the VCR.
3. Connect the RF OUT of the VCR to the RF IN of the TV set.
4. Search on the TV set and the VCR for UHF channel # 38. This is the default channel where the EchoStar DSB-2110 2CI
is programmed to.
Note : Use different UHF channels for VCR and EchoStar DSB-2110 2CI.
2. Connect the TV OUT socket of the EchoStar DSB-2110 2CI with the RF IN of the VCR.
3. Connect the RF OUT of the VCR to the RF IN of the TV set.
4. Search on the TV set and the VCR for UHF channel # 38. This is the default channel where the EchoStar DSB-2110 2CI
is programmed to.
Note : Use different UHF channels for VCR and EchoStar DSB-2110 2CI.
TV ANTENNA
ANT IN
TV OUT
VIDEO
AUDIO
(400mA Max.)
(400mA Max.)