EchoStar dsb-800 2ci Manuale Utente
8
Receiver to TV with Audio and Video RCAs
1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar DSB-800 2CI.
2. Connect the TV Out socket of the EchoStar DSB-800 2CI with the RF IN of the TV set.
3. Connect the Video and Audio RCAs of the EchoStar DSB-800 2CI to the Video and Audio
RCAs of the TV set.
2. Connect the TV Out socket of the EchoStar DSB-800 2CI with the RF IN of the TV set.
3. Connect the Video and Audio RCAs of the EchoStar DSB-800 2CI to the Video and Audio
RCAs of the TV set.
TV ANTENNA
TV
RF IN
VIDEO
AUDIO
IN
IN
Receiver to TV with SCART Cables
1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar DSB-800 2CI.
2. Connect the SCART cable from the TV SCART of the EchoStar DSB-800 2CI to the SCART of the TV set.
3. Search on the VCR for UHF channel # 38. This is the default channel where the EchoStar
DSB-800 2CI is programmed to.
4. When the EchoStar DSB-800 2CI is switched on the TV set still will automatically switch to the
SCART input of the TV.
2. Connect the SCART cable from the TV SCART of the EchoStar DSB-800 2CI to the SCART of the TV set.
3. Search on the VCR for UHF channel # 38. This is the default channel where the EchoStar
DSB-800 2CI is programmed to.
4. When the EchoStar DSB-800 2CI is switched on the TV set still will automatically switch to the
SCART input of the TV.
TV ANTENNA
TV
TV SCART
RF IN