EchoStar d-2510 ip viaccess Manuale Utente
10
One Actuated Dish
1. Connect the LNB IN socket of the EchoStar D-2510IP VIACCESS to the LNB.
2. Connect motor wires to M1 and M2. Switch these connections if the motor moves to the wrong direction.
3. Connect sensor wires to M.PULSE and GND connector.
4. Connect a mechanical polarotor to +5V, GND and SKEW connectors. [optional]
5. Connect ferrite polarizer to ferrite connectors. [optional]
2. Connect motor wires to M1 and M2. Switch these connections if the motor moves to the wrong direction.
3. Connect sensor wires to M.PULSE and GND connector.
4. Connect a mechanical polarotor to +5V, GND and SKEW connectors. [optional]
5. Connect ferrite polarizer to ferrite connectors. [optional]
Universal LNB
6. How to connect your dish to the EchoStar D-2510IP VIACCESS
One Actuated Dish with C/Ku feed
C-band Ku-band
LNB LNB
LNB LNB
ACTUATED DISH
WITH C/KU FEED
WITH C/KU FEED
1. Connect the cables from C and Ku-band LNB to a 12 Volt C/Ku switch.
2. Connect the coaxial cable from the 0/12 Volt switch to the LNB IN connector.
3. Connect the power cable which comes from the 0/12 Volt switch to the 0/12V(connector).
4. Connect motor wires to M1 and M2. Switch these connections if the motor moves to the wrong direction.
5. Connect sensor wires to M.PULSE and GND connector.
6. Connect polarotor to +5V, GND and SKEW connectors. [optional]
2. Connect the coaxial cable from the 0/12 Volt switch to the LNB IN connector.
3. Connect the power cable which comes from the 0/12 Volt switch to the 0/12V(connector).
4. Connect motor wires to M1 and M2. Switch these connections if the motor moves to the wrong direction.
5. Connect sensor wires to M.PULSE and GND connector.
6. Connect polarotor to +5V, GND and SKEW connectors. [optional]