EchoStar d-2510 ip viaccess Manuale Utente

15

If you are not satisfied with the Limit parameters e.g. since the
mechanical limits might not be set properly, you can erase the
position data and start again after adjusting the mechanical
limits at the dish.

If you want to erase all the position data, select “Erase Posit
ion Data” and press the RED  key twice.

The EchoStar D-2510IP VIACCESS now has
programmed the position of all selected satellites.
The next step is to store all channels on these
satellites. To do this  press the MENU key, select
the Installation option followed by the Program
Satellites option. Use the   key to select the next
satellite and press the OK key. The dish will
move to the selected satellite.

Select Start Search to store all channels.
Repeat this procedure for all satellites.

×  HOTBIRD  Ø

×  ASTRA1 Ø

If you want a fixed dish and an actuated dish, you can set
in this menu the “Fixed dish”.
Start with selecting the appropriate satellite and LNB Type
and press the RED  key twice.
To make a satellite again actuated, change the LNB Type
to the actuated  LNB type and press the RED key twice.