Yamaha gx-5 Manuale Proprietario

Front panel operation
Rotate the VOLUME control towards MAX to increase the
volume, and towards MIN to decrease the volume.

Remote control operation
Press the VOLUME + button to increase the volume and the
VOLUME – button to decrease the volume.

While the power is on, press the DISPLAY button to
display the time. If the power is off, you can proceed to the
next step.

While pressing the TIME ADJ button, press the HOUR
button and set the hour.
*

Press the HOUR button once to advance the time by 1
hour. Press and hold to advance continuously.

While pressing the TIME ADJ button, press the MINUTE
button and set the minute.
*

Press the MINUTE button once to advance the time by
1 minute. Press and hold to advance continuously.

*

The hour setting will not advance even if minute is
advanced from “59” to “00”.

In the event of a power failure or when the AC supply
lead is disconnected.
The time display will go out, however, the clock will function
for about 5 minutes without power supply. So you do not
have to reset the time if the AC power supply is resumed
within about 5 minutes.
When the AC power supply is resumed after more than 5
minutes pass without power supply, the time display will flash
on and off to indicate that the time must be reset.

Note
If this system is left for several minutes without setting the
time after the AC power lead of this system is connected to
the AC outlet, there may be a case that the display is turned
into a demonstration mode. (This mode is virtually
unnecessary for using this system.)
In this case, first turn the power on by pressing the POWER
switch to cancel the mode, and then set the time.

Changes.

Changes.