Yamaha RX-Z11 Guida Utente

■ Parameter initialization

Use this feature to reset the parameters of this unit to the initial 
factory settings. You can select the category of parameters to be 
initialized.

• Use “Initialize” in the sound field program menu to initialize the 

parameters of the desired program (see page 95).

• When the network settings are reset, “DHCP” in “Network” is 

automatically set to “On” (see page 111) and the registered client ID of 
this unit on your Yamaha MCX-2000 is cleared (see page 82).

■ MAC address filter

Use this feature to filter the access to this unit via LAN to control 
this unit by the MAC address of the accessing PC (see page 120).

y
You can register the MAC address that is allowed to access when “MAC 
FILTER” is set to “ON” by using the Web browser (see page 120).

■ TV format

Use this feature to set the color encoding format of your television.
Choices: NTSC, PAL
Initial setting:
[U.S.A., Canada, General and Korea models]: NTSC
[Other models]: PAL

This setting is applied to the video monitor in the main zone, Zone 2, Zone 
3, and Zone 4.

■ HDMI monitor check

Use this feature to activate or deactivate the monitor check function 
of this unit.

■ Language

Use this feature to select the language of your choice that appears in 
the GUI (graphical user interface) menu, OSD display in the zone 
monitor and the messages that appear in the front panel display.
Choices: ENGLISH (English), JAPANESE (Japanese), FRENCH 

(French), GERMAN (German), SPANISH (Spanish), 
RUSSIAN (Russian)

You can also select the language setting by using GUI menu. See page 114 
for details.

 ··· The selected language is displayed.

— ··· The selected language is not displayed. The menu items and 

messages are displayed in English.

See page 142 for the operation of the advanced setup.

Select this setting to initialize all the parameters of 
the sound field parameters (see page 91).

Select this setting except “Short Message” and 
“On Screen” (see page 108).

Select this setting except “Short Message” and 
“On Screen” (see page 108).

Select this setting to initialize all the parameters of 
this unit.

Select this setting to cancel the initialization 
procedure.

Only allows to accept the access from the PC whose 
MAC address is registered to this unit.

Allows to accept the access from any PC.

This unit receives the information of the available video 
signal resolutions from the video monitor connected via 
HDMI and you can only select the resolutions supported 
by the video monitor in “HDMI Resolution” (see 
page 107). 

You can select any resolution in “HDMI Resolution”.

—

—

—

Other languages