Acronis Acronis True Image Home 2010 TIHPB2ENS Manuale Utente
Codici prodotto
TIHPB2ENS
132
Copyright © Acronis, Inc., 2000-2009
4. Specify path to the folder with the Acronis Plug-in files. (Check the registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Acronis\MediaAddons\Settings\BartPE for the plug-in
location.)
location.)
5. Specify the full path to the resulting ISO file including the file name.
6. Check your settings in the summary screen and click Proceed.
7. Burn the .ISO to CD or DVD using a third-party tool or copy to a flash drive.
Once a machine boots into the WinPE, Acronis True Image Home starts automatically.
15.3.2. Adding the Acronis Plug-in to WinPE 2.x or 3.0
Acronis WinPE ISO Builder provides three methods of integrating Acronis True Image Home with
WinPE 2.x and WinPE 3.0:
WinPE 2.x and WinPE 3.0:
Adding the Acronis Plug-in to the existing PE 2 or PE 3 ISO. This comes in handy when you have to
add the plug-in to the previously configured PE 2 or PE 3 ISO that is already in use.
add the plug-in to the previously configured PE 2 or PE 3 ISO that is already in use.
Creating the PE 2 or PE 3 ISO with the plug-in from scratch.
Adding the Acronis Plug-in to a WIM file for any future purpose (manual ISO building, adding
other tools to the image and so on).
other tools to the image and so on).
To be able to perform any of the above operations, Acronis Plus Pack and Windows Automated
Installation Kit (WAIK) must be installed on your PC. If you have not installed WAIK, install it as
described in Creating WinPE-based rescue media.
Installation Kit (WAIK) must be installed on your PC. If you have not installed WAIK, install it as
described in Creating WinPE-based rescue media.
Acronis WinPE ISO Builder supports only x86 WinPE 2.x and WinPE 3.0. This WnPE distribution can also work on
x64 hardware.
x64 hardware.
A PE image based on Win PE 2.x or 3.0 requires at least 256MB RAM to work. The recommended memory size
for PE 2.x or 3.0 is 512MB.
for PE 2.x or 3.0 is 512MB.
Adding Acronis Plug-in to WinPE 2.x or 3.0 ISO
To add Acronis Plug-in to WinPE 2.x or 3.0 ISO:
1. Do one of the following:
When adding the plug-in to the existing Win PE 2 or PE 3 ISO, unpack all files of your Win PE 2 or
3 ISO to a separate folder on the hard disk.
When creating a new PE 2 or 3 ISO:
3 ISO to a separate folder on the hard disk.
When creating a new PE 2 or 3 ISO:
select from the Start menu Microsoft Windows AIK Windows PE Tools Command Prompt
run the copype.cmd script to create a folder with Windows PE files. For example, from a
command prompt, type:
run the copype.cmd script to create a folder with Windows PE files. For example, from a
command prompt, type:
cd Program Files\Windows AIK\Tools\PETools\
copype <arch> <destination>
copype <arch> <destination>
Where <arch> is the hardware architecture (can be x86, amd64, or ia64, but Acronis supports x86
only) and <destination> is a path to the local folder. For example,
only) and <destination> is a path to the local folder. For example,
copype x86 c:\winpe_x86
2. Select Acronis
Plus Pack for Acronis True Image Home 2010
Acronis WinPE ISO Builder from
the Start menu.
3. Specify path to the folder WinPE\ISO, e.g. c:\winpe_x86\ISO.