Zhone 2000 Guida Utente
48
2 0 0 0 - A 2 - G B 2 3 - 0 0
WAN Configuration Menu
Configuring the IAD for voice transmissions across the WAN involves several
tasks. Tasks in this chapter are described beginning at the WAN
Configuration menu, which varies based on the WAN interface and datalink
protocol.
tasks. Tasks in this chapter are described beginning at the WAN
Configuration menu, which varies based on the WAN interface and datalink
protocol.
Figure 4.2
WAN Configuration Menu - Configuring SDSL
Figure 4.3
WAN Configuration Menu (ATM) - Configuring T1/E1
NOTICE:
The options displayed on the WAN Configuration menu above are the
options you will see if ATM is the configured Datalink Protocol (refer to
“Configure Datalink Protocol” below).
options you will see if ATM is the configured Datalink Protocol (refer to
“Configure Datalink Protocol” below).
6
T1/E1, SDSL, or
USI with Frame
Relay
USI with Frame
Relay
1. Configure T1/E1 (page 4-54), or configure SDSL (page 4-50),
or configure USI (page 4-63)
2. Set the datalink protocol to Frame Relay (page 4-64)
3. Configure DLCIs (page 4-73)
4. Configure Frame Relay options (page 4-76)
5. Configure the voice path (page 4-101))
3. Configure DLCIs (page 4-73)
4. Configure Frame Relay options (page 4-76)
5. Configure the voice path (page 4-101))
6300
T1/E1, SDSL,
ADSL,
SHDSL with
ATM
ADSL,
SHDSL with
ATM
1. Configure T1/E1 (page 4-54), or configure SDSL (page 4-50),
or configure ADSL (page 4-61), or configure SHDSL
2. Set the datalink protocol to ATM (page 4-64)
3. Configure PVCs (page 4-66)
4. Configure ATM (page 4-71)
5. Configure the voice path (page 4-101)
3. Configure PVCs (page 4-66)
4. Configure ATM (page 4-71)
5. Configure the voice path (page 4-101)