Zhone 6388 Manuale Utente

3. Using the Web Interface

The Tools tab provides access to system commands and functions.

To make changes permanent, click on Tools (at the top of the page) and select 
System Commands. The following commands are used to configure the router:

„

Save All: Click on this button in order to permanently save the current 
configuration of the router. If you do restart the system without saving your 
configuration, the CPE will revert back to the previously saved configuration.

„

Restart: Use this button to restart the system. If you have not saved your 
configurations, the router will revert to the previously saved configuration upon 
restarting. Connectivity to the unit will be lost. You can reconnect after the unit 
reboots.

„

Restore Defaults: Use this button to restore the default settings selected by 
your service provider. Connectivity to the unit will be lost. You can reconnect 
after the unit reboots. 

 

The remote log feature forwards all logged information to a remote PC. The type of 
information forwarded to the remote PC depends upon the log level. Each log 
message is assigned a severity level, which indicates how seriously the triggering 
event affects router functions. When you configure logging, you must specify a 
severity level for each facility. Messages that belong to the facility and are rated at 
that level or higher are logged to the destination.

For PPPoE and PPPoA connections, you can select Debug if you want to log the 
connection information. This is helpful when trying to debug connection problems.