Zhone sia2410r Guida Utente

 

Net To Net Technologies SIA2410R User Manual 

 

Net To Net Technologies                                                                                                     36 

 
The DHCP (Dynamic Host Configuration Protocol) protocol enables a DHCP 
client who has not set the IP address to receive an IP address, and other host 
configuration parameters, automatically.  
Net To Net Technologies SIA2410R supports the following two functions: a 
DHCP relay function that delivers the IP address request packet received from 
the DHCP client to the specified DHCP server, and a DHCP server function that 
allocates the IP address upon the receipt of the IP address request packet. 
With these functions, the DHCP client can gain access to the IP network 
without setting the IP address. 

To set up dhcp relay, you have to set the following command: 

 

Command 

dhcp relay to <server> 

Parameters 

<server >  

IP address of DHCP server 

Example 

 
(conf)# dhcp relay to 168.126.63.1

 

 

 

 

To delete dhcp relay, you have to set the following command: 

 

Command 

 
 

Step1:  Setting the IP address pool : 

To assign IP addresses dynamically, set the IP address pool. It is 
possible to set up multiple pools, but the range of IP addresses must 
not overlap.  The following command configures an IP address pool: