ZyXEL N4100 Guida Utente
Chapter 12 Keypad
N4100 User’s Guide
115
12.3 Keypad Configuration Examples
These sections explain how to configure the N4100 for use with a PS/2 keypad.
12.3.1 Keypad with Pre-Paid Billing Example
The following is an example of how to configure the N4100 to use a PS/2 keypad
for pre-paid billing.
for pre-paid billing.
1
Click ADVANCED > BILLING.
2
Select Pre-Paid and click Apply.
Figure 44 Select Pre-Paid Billing
3
Click ADVANCED > KEYPAD.
4
Define your pre-paid billing profiles and click Apply.
Use for Post-
Paid Billing
Paid Billing
Use the following fields to define the basic charge levels and rates for
accounts.
accounts.
Base on
Select the billing time unit from the drop-down list box.
Charge by
levels
Use this field to enable or disable the charge by levels function. See
Level
These are the read-only level numbers of the charges.
Conditions
Charges may vary by subscription time. A charge level takes effect when
the amount of time the subscriber has used is bigger than or the same as
the number displayed in the Time Range field.
the amount of time the subscriber has used is bigger than or the same as
the number displayed in the Time Range field.
Time
Range
Enter the number of time units (defined in the Base on field) for this
charge level.
charge level.
Unit Price
Enter each level’s charge per time unit.
Apply
Click Apply to save your changes back to the N4100.
Table 17 ADVANCED > KEYPAD
LABEL
DESCRIPTION