ZyXEL 2WG Guida Utente
Chapter 10 WLAN Screens
ZyWALL 2WG User’s Guide
217
10.3 The Static DHCP Screen
This table allows you to assign IP addresses on the WLAN to specific individual computers
based on their MAC addresses.
To change your ZyWALL’s WLAN static DHCP settings, click NETWORK >WLAN >
Static DHCP. The screen appears as shown.
based on their MAC addresses.
To change your ZyWALL’s WLAN static DHCP settings, click NETWORK >WLAN >
Static DHCP. The screen appears as shown.
Windows
Networking
(NetBIOS over
TCP/IP)
NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that
enable a computer to connect to and communicate with a LAN. For some dial-up
services such as PPPoE or PPTP, NetBIOS packets cause unwanted calls.
However it may sometimes be necessary to allow NetBIOS packets to pass
through to the WAN in order to find a computer on the WAN.
Allow between
WLAN and LAN
Select this check box to forward NetBIOS packets from the WLAN to the LAN and
from the LAN to the WLAN.
Clear this check box to block all NetBIOS packets going from the LAN to the WLAN
Clear this check box to block all NetBIOS packets going from the LAN to the WLAN
and from the WLAN to the LAN.
Allow between
WLAN and WAN
1
Select this check box to forward NetBIOS packets from the WLAN to WAN 1 and
from WAN 1 to the WLAN.
Clear this check box to block all NetBIOS packets going from the WLAN to WAN 1
Clear this check box to block all NetBIOS packets going from the WLAN to WAN 1
and from WAN 1 to the WLAN.
Allow between
WLAN and WAN
2
Select this check box to forward NetBIOS packets from the WLAN to WAN 2 and
from WAN 2 to the WLAN.
Clear this check box to block all NetBIOS packets going from the WLAN to WAN 2
Clear this check box to block all NetBIOS packets going from the WLAN to WAN 2
and from WAN 2 to the WLAN.
Allow between
WLAN and DMZ
Select this check box to forward NetBIOS packets from the WLAN to the DMZ and
from the DMZ to the WLAN. If your firewall is enabled with the default policy set to
block WLAN to DMZ traffic and DMZ to WLAN traffic, you also need to configure
WLAN to DMZ and DMZ to WLAN firewall rules that forward NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the WLAN to the
Clear this check box to block all NetBIOS packets going from the WLAN to the
DMZ and from the DMZ to the WLAN.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to begin configuring this screen afresh.
Table 50 NETWORK > WLAN (continued)
LABEL
DESCRIPTION