ZyXEL p-660h-61 Guida Utente

Prestige 660H Series User’s Guide 

19-4 

Maintenance 

Tx B/s  

This field displays the number of bytes transmitted in the last second. 

Rx B/s 

This field displays the number of bytes received in the last second. 

Up Time  

This field displays the elapsed time this port has been up.  

Collisions 

This is the number of collisions on this port. 

Poll Interval(s) 

Type the time interval for the browser to refresh system statistics. 

Set Interval 

Click this button to apply the new poll interval you entered in the Poll Interval field above. 

Stop 

Click this button to halt the refreshing of the system statistics. 

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to 
obtain TCP/IP configuration at start-up from a server. You can configure the Prestige as a DHCP 
server or disable it. When configured as a server, the Prestige provides the TCP/IP configuration for 
the clients. If set to None, DHCP service will be disabled and you must have another DHCP server on 
your LAN, or else the computer must be manually configured. 

Click Maintenance, and then the DHCP Table tab. Read-only information here relates to your DHCP 
status. The DHCP table shows current DHCP Client information (including IP Address, Host Name 
and MAC Address) of all network clients using the DHCP server. 

 

The following table describes the fields in this screen. 

Host Name 

This is the name of the host computer. 

IP Address 

This field displays the IP address relative to the Host Name field.  

MAC Address   This field displays the MAC (Media Access Control) address of the computer with the displayed 

host name. 

Every Ethernet device has a unique MAC address. The MAC address is assigned at the factory 
and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.