ZyXEL p-660h-61 Guida Utente

Prestige 660H Series User’s Guide 

25-8 Remote 

Node 

Configuration 

Follow the steps shown next to edit Menu 11.6 – Remote Node ATM Layer Options. 

In menu 11.1, move the cursor to the Edit ATM Options field and then press [SPACE BAR] to select 
Yes. Press [ENTER] to display Menu 11.6 – Remote Node ATM Layer Options. 

There are two versions of menu 11.6 for the Prestige, depending on whether you chose VC-
based/LLC-based multiplexing and PPP encapsulation in menu 11.1. 

For VC-based multiplexing, by prior agreement, a protocol is assigned a specific virtual circuit, for 
example, VC1 will carry IP. Separate VPI and VCI numbers must be specified for each protocol. 

 

 

 

 

 

Menu 11.6 - Remote Node ATM Layer Options 
VPI/VCI (VC-Multiplexing) 
 
    VC Options for IP: 
      VPI #= 8 
      VCI #= 35 
      ATM QoS Type= UBR 
      Peak Cell Rate (PCR)= 0 
      Sustain Cell Rate (SCR)= 0 
      Maximum Burst Size (MBS)= 0
 

VC Options for Bridge: 
  VPI #= 1 
  VCI #= 36 
  ATM QoS Type= N/A 
  Peak Cell Rate (PCR)= N/A 
  Sustain Cell Rate (SCR)= N/A 
  Maximum Burst Size (MBR)= N/A 
 

Press ENTER to Confirm or ESC to Cancel: 

         Menu 11.5 - Remote Node Filter 
 
    Input Filter Sets: 
      protocol filters= 
        device filters= 
    Output Filter Sets: 
      protocol filters= 
        device filters= 
    Call Filter Sets: 
      protocol filters= 
        device filters= 
 
 
     Enter here to CONFIRM or ESC to CANCEL: