ZyXEL p-660r-t1 v2 Manuale Utente

P-660R-Tx v2 Series User’s Guide

38

Chapter 2 Introducing the Web Configurator

WAN

WAN Setup

Use this screen to change the ZyXEL Device’s WAN remote 

node settings.

WAN Backup

Use this screen to configure your traffic redirect properties and 

WAN backup settings.

NAT

SUA Only

Use this screen to configure servers behind the ZyXEL Device.

Full Feature

Use this screen to configure network address translation 

mapping rules.

Security

Use this screen to configure Internet security and apply the 

predefined filter rules.

Dynamic DNS

Use this screen to set up dynamic DNS.

Time and Date

Use this screen to change your ZyXEL Device’s time and date.

Remote 

Management

Use this screen to configure through which interface(s) and from 

which IP address(es) users can use Telnet/FTP/Web to manage 

the ZyXEL Device.

UPnP

Use this screen to enable UPnP on the ZyXEL Device.

Maintenance

System Status

This screen contains administrative and system-related 

information.

DHCP Table

This screen displays DHCP (Dynamic Host Configuration 

Protocol) related information and is READ-ONLY.

Any IP Table

This screen shows current read-only information of all network 

devices that use the Any IP feature to communicate with the 

ZyXEL Device.

Diagnostic

General

These screens display information to help you identify problems 

with the ZyXEL Device general connection.

DSL Line

These screens display information to help you identify problems 

with the DSL line.

Firmware

Use this screen to upload firmware to your ZyXEL Device.

Configuration

This screen is only available on the P-660R-T1C v2.  Use these 

screens to backup, restore or reset the configuration of your 

ZyXEL Device.

LOGOUT

Click this label to exit the web configurator.

Table 3   Web Configurator Screens Summary (continued)