ZyXEL 35 Guida Utente

ZyWALL 35 Support Notes

User can configure ZyWALL to act as a router mode firewall or bridge (transparent) firewall. The default

is router mode firewall.

Step1. Before changing ZyWALL to bridge mode, if admin wants to make the ZyWALL’s LAN PC be

able to get DHCP IP address assignment from the DHCP server or the gateway upper than the ZyWALL,

there is one firewall rule needs to be activated.

Go to Firewall >> Rule Summary; choose ‘WAN to LAN’ from ‘Packet Direction’. You will see a rule

to permit the service type, ‘BOOTP_CLIENT(UDP:68)’, to pass firewall. It’s INACTIVE by default.

Admin can activate the rule by clicking the ‘N’ as following picture. Then the rule will be activated right

away.

Step2. To change the device mode, go to MAINTENANCE >> Device Mode. Select ‘Bridge’ and