ZyXEL nbg-4615 Guida Utente
Chapter 16 WAN
NBG4615 User’s Guide
157
The following table describes the labels in this screen.
Table 54 Network > WAN > Internet Connection: Ethernet Encapsulation
LABEL
DESCRIPTION
ISP Parameters for Internet Access
Encapsulation
Encapsulation
You must choose the Ethernet option when the WAN port is used as a
regular Ethernet.
regular Ethernet.
WAN IP Address Assignment
Get
automatically
from ISP
(Default)
Get
automatically
from ISP
(Default)
Select this option If your ISP did not assign you a fixed IP address. This
is the default selection.
is the default selection.
Bigpond
Select Enable if you subscribe to Internet service from BigPond in
Australia. Then configure the fields below with the information
provided.
Australia. Then configure the fields below with the information
provided.
Server
Type the IP address of the BigPond server.
User Name
Type the user name given to you by your ISP. You can use
alphanumeric and -_@$./ characters, and it can be up to 31 characters
long.
alphanumeric and -_@$./ characters, and it can be up to 31 characters
long.
Password
Type the password associated with the user name above. Use up to 64
ASCII characters except [, ] and ?. This field can be blank.
ASCII characters except [, ] and ?. This field can be blank.
Retype to
Confirm
Type your password again for confirmation.
Use Fixed IP
Address
Address
Select this option If the ISP assigned a fixed IP address.
IP Address
Enter your WAN IP address in this field if you selected Use Fixed IP
Address.
Address.
IP Subnet
Mask
Enter the IP Subnet Mask in this field.
Gateway IP
Address
Enter a Gateway IP Address (if your ISP gave you one) in this field.
WAN DNS Assignment
First DNS Server
First DNS Server
Second DNS
Server
Server
Select From ISP if your ISP dynamically assigns DNS server
information (and the NBG4615's WAN IP address). The field to the right
displays the (read-only) DNS server IP address that the ISP assigns.
information (and the NBG4615's WAN IP address). The field to the right
displays the (read-only) DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter
the DNS server's IP address in the field to the right. If you chose User-
Defined, but leave the IP address set to 0.0.0.0, User-Defined
changes to None after you click Apply. If you set a second choice to
User-Defined, and enter the same IP address, the second User-
Defined changes to None after you click Apply.
the DNS server's IP address in the field to the right. If you chose User-
Defined, but leave the IP address set to 0.0.0.0, User-Defined
changes to None after you click Apply. If you set a second choice to
User-Defined, and enter the same IP address, the second User-
Defined changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do not
configure a DNS server, you must know the IP address of a computer in
order to access it.
configure a DNS server, you must know the IP address of a computer in
order to access it.
WAN MAC
Address
Address
The MAC address section allows users to configure the WAN port's MAC
address by either using the NBG4615’s MAC address, copying the MAC
address from a computer on your LAN or manually entering a MAC
address.
address by either using the NBG4615’s MAC address, copying the MAC
address from a computer on your LAN or manually entering a MAC
address.