ZyXEL nbg-4615 Guida Utente
Chapter 28 Maintenance
NBG4615 User’s Guide
236
28.10 Sys OP Mode Screen
Use this screen to select how you want to use your NBG4615.
Figure 144 Maintenance > Sys OP Mode
The following table describes the labels in the General screen.
Table 86 Maintenance > Sys OP Mode
LABEL
DESCRIPTION
System Operation Mode
Router
Router
Select Router Mode if your device routes traffic between a local
network and another network such as the Internet. This mode
offers services such as a firewall or bandwidth management.
network and another network such as the Internet. This mode
offers services such as a firewall or bandwidth management.
You can configure the IP address settings on your WAN port.
Contact your ISP or system administrator for more information on
appropriate settings.
Contact your ISP or system administrator for more information on
appropriate settings.
Access Point
Select Access Point Mode if your device bridges traffic between
clients on the same network.
clients on the same network.
• In Access Point Mode, all Ethernet ports have the same IP
address.
• All ports on the rear panel of the device are LAN ports,
including the port labeled WAN. There is no WAN port.
• The DHCP server on your device is disabled.
• The IP address of the device on the local network is set to
• The IP address of the device on the local network is set to
192.168.1.2.