ZyXEL nbg-4615 Guida Utente

Chapter 29 Troubleshooting

NBG4615 User’s Guide

If you reset the NBG4615, you lose all of the changes you have made. The 
NBG4615 re-loads its default settings, and the password resets to 1234. You have 
to make all of your changes again.

You will lose all of your changes when you push the RESET button.

To reset the NBG4615:

Make sure the power LED is on.

Press the RESET button for longer than 1 second to restart/reboot the NBG4615.

Press the RESET button for longer than five seconds to set the NBG4615 back to 
its factory-default configurations.

If the NBG4615 restarts automatically, wait for the NBG4615 to finish restarting, 
and log in to the Web Configurator. The password is “1234”.

If the NBG4615 does not restart automatically, disconnect and reconnect the 
NBG4615’s power. Then, follow the directions above again.

I cannot access the NBG4615 or ping any computer from the WLAN (wireless AP 
or router).

Make sure the wireless LAN is enabled on the NBG4615.

Make sure the wireless adapter on the wireless station is working properly.

Make sure the wireless adapter installed on your computer is IEEE 802.11 
compatible and supports the same wireless standard as the NBG4615.

Make sure your computer (with a wireless adapter installed) is within the 
transmission range of the NBG4615.