ZyXEL nbg-4615 Guida Utente

 Chapter 6 Monitor

NBG4615 User’s Guide

Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-
only information here includes port status, packet specific statistics and the 
"system up time". The Poll Interval(s) field is configurable and is used for 
refreshing the screen.

Figure 29   Summary: Packet Statistics 

The following table describes the labels in this screen.

Table 17   Summary: Packet Statistics

Port

This is the NBG4615’s port type.

Status 

For the LAN ports, this displays the port speed and duplex setting or 
Down when the line is disconnected.

For the WAN port, it displays the port speed and duplex setting if 
you’re using Ethernet encapsulation and Idle (line (ppp) idle), Dial 
(starting to trigger a call) and Drop (dropping a call) if you're using 
PPPoE or PPTP encapsulation. This field displays Down when the line 
is disconnected.

For the WLAN, it displays the maximum transmission rate when the 
WLAN is enabled and Down when the WLAN is disabled.

TxPkts 

This is the number of transmitted packets on this port.

RxPkts 

This is the number of received packets on this port.

Collisions 

This is the number of collisions on this port.

Tx B/s 

This displays the transmission speed in bytes per second on this port.

Rx B/s

This displays the reception speed in bytes per second on this port.

Up Time

This is the total time the NBG4615 has been for each session.

System Up Time

This is the total time the NBG4615 has been on.

Poll Interval(s)

Enter the time interval in seconds for refreshing statistics in this field.

Set Interval

Click this button to apply the new poll interval you entered in the Poll 
Interval(s) field.

Stop

Click Stop to stop refreshing statistics.