ZyXEL nbg-4615 Guida Utente
Chapter 14 Wireless LAN
NBG4615 User’s Guide
144
Note: After you click Push Button on this screen, you have to press a similar button
in the wireless station utility within 2 minutes. To add the second wireless
station, you have to press these buttons on both device and the wireless station
again after the first 2 minutes.
station, you have to press these buttons on both device and the wireless station
again after the first 2 minutes.
Figure 83 Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
14.9 Scheduling Screen
Use this screen to set the times your wireless LAN is turned on and off. Wireless
LAN scheduling is disabled by default. The wireless LAN can be scheduled to turn
LAN scheduling is disabled by default. The wireless LAN can be scheduled to turn
Table 50 Network > Wireless LAN > WPS Station
LABEL
DESCRIPTION
Push Button
Use this button when you use the PBC (Push Button Configuration)
method to configure wireless stations’s wireless settings. See
method to configure wireless stations’s wireless settings. See
Section
4.3.1 on page 32
.
Click this to start WPS-aware wireless station scanning and the wireless
security information synchronization.
security information synchronization.
Or input
station’s PIN
number
station’s PIN
number
Use this button when you use the PIN Configuration method to
configure wireless station’s wireless settings. See
configure wireless station’s wireless settings. See
Section 4.3.2 on page
33
.
Type the same PIN number generated in the wireless station’s utility.
Then click Start to associate to each other and perform the wireless
security information synchronization.
Then click Start to associate to each other and perform the wireless
security information synchronization.