ZyXEL ES-3148 Guida Utente

Chapter 11 Spanning Tree Protocol

ES-3148 User’s Guide

Use this screen to configure RSTP settings, see 

 for more information 

on RSTP. Click RSTP in the Advanced Application > Spanning Tree Protocol screen. 

Figure 52   Advanced Application > Spanning Tree Protocol > RSTP 

The following table describes the labels in this screen. 

Table 27   Advanced Application > Spanning Tree Protocol > RSTP 

Status

Click Status to display the RSTP Status screen (see 

).

Active

Select this to activate RSTP. Clear this to disable RSTP.

Note: You must also activate Rapid Spanning Tree in the 

Advanced Application > Spanning Tree Protocol > 
Configuration screen to enable RSTP on the Switch.

Bridge Priority

Bridge priority is used in determining the root switch, root port and designated port. 

The switch with the highest priority (lowest numeric value) becomes the STP root 

switch. If all switches have the same priority, the switch with the lowest MAC 

address will then become the root switch. Select a value from the drop-down list 

box. 
The lower the numeric value you assign, the higher the priority for this bridge.
Bridge Priority determines the root bridge, which in turn determines Hello Time, 

Max Age and Forwarding Delay.