ZyXEL ES-3148 Guida Utente

Chapter 27 Differentiated Services

ES-3148 User’s Guide

Activate DiffServ to apply marking rules or IEEE 802.1p priority mapping on the selected 
port(s). 
Click IP Application > DiffServ in the navigation panel to display the screen as shown.

Figure 122   IP Application > DiffServ 

The following table describes the labels in this screen.

Use this screen to configure TRTCM settings. Click the 2-rate 3 Color Marker link in the 
DiffServ screen to display the screen as shown next. 

Table 85   IP Application > DiffServ 

Active

Select this option to enable DiffServ on the Switch.

Port

This field displays the index number of a port on the Switch. 

*

Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this 

row first to set the common settings and then make adjustments on a port-by-port 

basis. 

Note: Changes in this row are copied to all the ports as soon as you 

make them.

Active

Select Active to enable DiffServ on the port. 

Apply

Click Apply to save your changes to the Switch’s run-time memory. The Switch loses 

these changes if it is turned off or loses power, so use the Save link on the top 

navigation panel to save your changes to the non-volatile memory when you are done 

configuring.

Cancel

Click Cancel to begin configuring this screen afresh.