ZyXEL ES-3148 Guida Utente

Chapter 33 Cluster Management

ES-3148 User’s Guide

You can use FTP to upload firmware to a cluster member switch through the cluster manager 
switch as shown in the following example.

Figure 158   Example: Uploading Firmware to a Cluster Member Switch 

The following table explains some of the FTP parameters.

Use this screen to configure clustering management. Click Configuration from the Cluster 
Management screen to display the next screen.

C:\>ftp 192.168.1.1
Connected to 192.168.1.1.
220 Switch FTP version 1.0 ready at Thu Jan  1 00:58:46 1970
User (192.168.0.1:(none)): admin
331 Enter PASS command
Password:
230 Logged in
ftp> ls
200 Port command okay
150 Opening data connection for LIST
--w--w--w-   1 owner    group         3042210 Jul 01 12:00 ras
-rw-rw-rw-   1 owner    group          393216 Jul 01 12:00 config
--w--w--w-   1 owner    group               0 Jul 01 12:00 fw-00-a0-c5-01-23-46
-rw-rw-rw-   1 owner    group               0 Jul 01 12:00 config-00-a0-c5-01-23-46
226 File sent OK
ftp: 297 bytes received in 0.00Seconds 297000.00Kbytes/sec.
ftp> bin
200 Type I OK
ftp> put 370lt0.bin fw-00-a0-c5-01-23-46
200 Port command okay
150 Opening data connection for STOR fw-00-a0-c5-01-23-46
226 File received OK
ftp: 262144 bytes sent in 0.63Seconds 415.44Kbytes/sec.
ftp>

Table 114   FTP Upload to Cluster Member Example 

User

Enter “admin”. 

Password 

The web configurator password default is 1234.

ls

Enter this command to list the name of cluster member switch’s 

firmware and configuration file.

360lt0.bin 

This is the name of the firmware file you want to upload to the 

cluster member switch.

fw-00-a0-c5-01-23-46

This is the cluster member switch’s firmware name as seen in the 

cluster manager switch.

config-00-a0-c5-01-23-46 This is the cluster member switch’s configuration file name as seen 

in the cluster manager switch.