ZyXEL ES-3148 Guida Utente

Chapter 7 Basic Setting

ES-3148 User’s Guide

Use this screen to configure Switch port settings. Click Basic Setting > Port Setup in the 
navigation panel to display the configuration screen.

Figure 29   Basic Setting > Port Setup 

The following table describes the labels in this screen. 

Manageable  This field displays whether the Switch can be managed using the specified IP address. 

Delete

Click Delete to remove the selected entry from the summary table.

Cancel Click 

Cancel to clear the Delete check boxes.

Table 12   Basic Setting > IP Setup (continued)

Table 13   Basic Setting > Port Setup 

Port

This is the port index number. 

*

Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this 

row first to set the common settings and then make adjustments on a port-by-port 

basis. 

Note: Changes in this row are copied to all the ports as soon as you 

make them.

Active

Select this check box to enable a port. The factory default for all ports is enabled. A 

port must be enabled for data transmission to occur.

Name

Enter a descriptive name that identifies this port. You can enter up to 64 alpha-

numerical characters. 

Note: Due to space limitation, the port name may be truncated in 

some web configurator screens. 

Type

This field displays 10/100M for an Ethernet/Fast Ethernet connection and 10/100/

1000M for Gigabit connections.