ZyXEL nbg-334sh Manuale Utente
![ZyXEL](https://files.manualsbrain.com/attachments/3214a2e9b754be0b3a733d7fd22528bce8dfdece/common/fit/150/50/aafad0ddc2d0e29fd47cd3dd2d9b75f1e404d4f49531d3941fba34789d6b/brand_logo.jpeg)
Chapter 14 Bandwidth Management
ZyXEL NBG-334SH User’s Guide
142
14.7 Default Bandwidth Management Classes and Priorities
If you enable bandwidth management but do not configure a rule for critical traffic like VoIP,
the voice traffic may then get delayed due to insufficient bandwidth. With the automatic traffic
classifier feature activated, the ZyXEL Device automatically assigns a default bandwidth
management class and priority to traffic that does not match any of the user-defined rules. The
traffic is classified based on the traffic type. Real-time traffic always gets higher priority over
other traffic.
The following table shows you the priorities between the three default classes (AutoClass_H,
AutoClass_M and Default Class) and user-defined rules. 6 is the highest priority.
the voice traffic may then get delayed due to insufficient bandwidth. With the automatic traffic
classifier feature activated, the ZyXEL Device automatically assigns a default bandwidth
management class and priority to traffic that does not match any of the user-defined rules. The
traffic is classified based on the traffic type. Real-time traffic always gets higher priority over
other traffic.
The following table shows you the priorities between the three default classes (AutoClass_H,
AutoClass_M and Default Class) and user-defined rules. 6 is the highest priority.
14.8 Bandwidth Management General Configuration
Click Management > Bandwidth MGMT to open the bandwidth management General
screen.
screen.
Figure 78 Bandwidth Management: General
Table 56 Bandwidth Management Priority with Default Classes
CLASS TYPE
PRIORITY
User-defined with high priority
6
AutoClass_H 5
User-defined with medium priority
4
AutoClass_M
3
User-defined with low priority
2
Default Class
1