ZyXEL p-330w Guida All'Installazione Rapida

ZyXEL P-330W 

2 Hardware Installation 

 

 

 

 

 

 

 

 

 

 

 

 

 

POWER 

Connect the end of the included power adaptor (use only this adapter) to this power socket.    

LAN 1-4 

Use an Ethernet cable to connect at least one computer for initial P-330W configuration. These 
ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-sensing (automatically 
adjust to the type of Ethernet cable you use (straight-through or crossover)).  

WAN 

Connect your cable/satellite/DSL modem to this port with the cable that came with your modem. 

RESET 

You only need to use this button if you’ve forgotten the P-330W’s password. Push the button for 
less than 5 seconds to cause the P-330W to reboot, push for 10 seconds to cause the P-330W to 
reset to factor defaults.  See your User’s Guide for details).  

Antenna 

The P-330W uses a RP-SMA connection to attach the antenna for wireless networking.  The 
antenna will need to be attached here before you can use the wireless LAN. 

After you’ve made the connections, connect the power cable to a power supply and look at the front panel LEDs. 

3