ZyXEL p-330w Guida All'Installazione Rapida

ZyXEL P-330W

3.2 Checking/Updating Your Computer’s IP Address

1. In the computer, click Start, (All) Programs, Accessories and then Command Prompt.

2. In

the

Command Prompt window, type "ipconfig" and then press ENTER to verify that your computer’s static IP

address is in the correct subnet (in the range between 192.168.10.2 and 192.168.10.254 if using the default P-
330W LAN IP address). Alternatively, to have the P-330W assign your computer a new IP address (from the IP
pool), make sure your P-330W is turned on, type "ipconfig/release" and then press ENTER to release the previous
IP address settings. Then type "ipconfig/renew" and press ENTER to get a new IP address.

3.3 Testing the Connection to the P-330W

1. Click

Start, (All) Programs, Accessories and then Command Prompt.

2. In

the

Command Prompt window, type "ping 192.168.10.1” followed by a space and the IP address of the P-330W

(192.168.10.1 is the default).

3. Press

ENTER. The following screen displays.

C:\>ping 192.168.10.1

Pinging 192.168.10.1 with 32 bytes of data:

Reply from 192.168.10.1: bytes=32 time=10ms TTL=254
Reply from 192.168.10.1: bytes=32 time<10ms TTL=254
Reply from 192.168.10.1: bytes=32 time<10ms TTL=254
Reply from 192.168.10.1: bytes=32 time<10ms TTL=254

Ping statistics for 192.168.10.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 10ms, Average = 2ms

C:\>

Your computer can now communicate with the P-330W via the ETHERNET port.