ZyXEL P-2602HW Guida Utente

Pagina di 465
Chapter 18 VPN Screens
P-2602H(W)(L)-DxA User’s Guide
254
18.14  Manual Key Setup
Manual key management is useful if you have problems with IKE key management.
18.14.1  Security Parameter Index (SPI) 
An SPI is used to distinguish different SAs terminating at the same destination and using the 
same IPSec protocol. This data allows for the multiplexing of SAs to a single gateway. The 
SPI (Security Parameter Index) along with a destination IP address uniquely identify a 
particular Security Association (SA). The SPI is transmitted from the remote VPN gateway to 
the local VPN gateway. The local VPN gateway then uses the network, encryption and key 
values that the administrator associated with the SPI to establish the tunnel.
Current ZyXEL implementation assumes identical outgoing and incoming SPIs.
18.15  Configuring Manual Key 
You only configure VPN Manual Key when you select Manual in the IPSec Key Mode field 
on the VPN IKE screen. This is the VPN Manual Key screen as shown next. 
SA Life Time 
(Seconds)
Define the length of time before an IKE SA automatically renegotiates in this field. 
It may range from 60 to 3,000,000 seconds (almost 35 days). 
A short SA Life Time increases security by forcing the two VPN gateways to 
update the encryption and authentication keys. However, every time the VPN 
tunnel renegotiates, all users accessing remote resources are temporarily 
disconnected. 
Encapsulation 
Select Tunnel mode or Transport mode from the drop-down list box. 
Perfect Forward 
Secrecy (PFS)
Perfect Forward Secrecy (PFS) is disabled (NONE) by default in phase 2 IPSec 
SA setup. This allows faster IPSec setup, but is not so secure. Choose DH1 or 
DH2 from the drop-down list box to enable PFS. DH1 refers to Diffie-Hellman 
Group 1 a 768 bit random number. DH2 refers to Diffie-Hellman Group 2 a 1024 
bit (1Kb) random number (more secure, yet slower). 
Back
Click Back to return to the previous screen.
Apply
Click Apply to save your changes back to the ZyXEL Device and return to the 
VPN-IKE screen.
Cancel
Click Cancel to return to the VPN-IKE screen without saving your changes. 
Table 97   Advanced VPN Policies
LABEL
DESCRIPTION