ZyXEL P-2602HW Guida Utente

 Chapter 21 Bandwidth Management

P-2602H(W)(L)-DxA User’s Guide

Click the Edit icon or User defined in the Service field to configure a bandwidth management 
rule. Use bandwidth rules to allocate specific amounts of bandwidth capacity (bandwidth 
budgets) to specific applications and/or subnets.  

Figure 172   Bandwidth Management Rule Configuration

Bandwidth (kbps)

Specify the maximum bandwidth allowed for the rule in kbps. The 

recommendation is a setting between 20 kbps and 20000 kbps for an individual 

rule. 
If you want to leave some bandwidth for traffic that does not match a bandwidth 

filter, make sure that the interface’s root class has more bandwidth than the sum 

of the bandwidths of the interface’s bandwidth management rules.

Add

Click this button to save your rule. It displays in the following table.

#

This is the number of an individual bandwidth management rule.

Rule Name

This is the name of the rule.

Destination Port

This is the port number of the destination. 0 means any destination port.

Priority

This is the priority of this rule. 

Bandwidth (kbps)

This is the maximum bandwidth allowed for the rule in kbps. 

Modify

Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing rule.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 122   Bandwidth Management: Rule Setup (continued)