ZyXEL NBG-417N Manuale Utente

 Chapter 8 WAN

NBG-417N User’s Guide

Use this screen to enable Multicast, allow Windows Networking and enable 
Auto-bridge.

Note: The three categories shown in this screen are independent of each other.  

To change your NBG-417N’s advanced WAN settings, click Network > WAN > 
Advanced. The screen appears as shown.

Figure 59   Network > WAN > Advanced 

Clone the 
computer’s MAC 
address - IP 
Address

Select Clone the computer's MAC address - IP Address and 
enter the IP address of the computer on the LAN whose MAC you 
are cloning. Once it is successfully configured, the address will be 
copied to the rom file. It will not change unless you change the 
setting or upload a different ROM file. 

Set WAN MAC 
Address

Select this option and enter the MAC address you want to use.

Apply

Click Apply to save your changes back to the NBG-417N.

Reset

Click Reset to begin configuring this screen afresh.

Table 36   Network > WAN > Internet Connection: PPTP Encapsulation