ZyXEL NBG-417N Manuale Utente

Chapter 5 AP Mode

NBG-417N User’s Guide

Note: If you change the IP address of the NBG-417N in the screen below, you will 

need to log into the NBG-417N again using the new IP address.

Figure 27   Network > LAN > IP   

The table below describes the labels in the screen.

Table 21   Network > LAN > IP

   

  

The configuration of wireless and maintenance settings in AP Mode is the same as 
for Router Mode.

• See 

 for information on the configuring your wireless 

network.

• See 

 for information on the configuring 

your Maintenance settings. 

Get from 
DHCP Server

Select this to let the DHCP server in the gateway assign the NBG-417N IP 
address.

User Defined 
LAN IP

Select this to give the NBG-417N a static IP address.

IP Address

Type the IP address in dotted decimal notatiion. The default setting is 
192.168.1.2. If you change the IP address you will have to log in again 
with the new IP address.  

IP Subnet 
Mask

The subnet mask specifies the network number portion of an IP address. 
Your NBG-417N will automatically calculate the subnet mask based on the 
IP address that you assign. Unless you are implementing subnetting, use 
the subnet mask computed by the NBG-417N.

Apply

Click Apply to save your changes to the NBG-417N.

Reset

Click Reset to reload the previous configuration for this screen.