ZyXEL NBG-417N Manuale Utente
Chapter 7 Wireless LAN
NBG-417N User’s Guide
93
on or off on certain days and at certain times. To open this screen, click Network
> Wireless LAN > Scheduling tab.
> Wireless LAN > Scheduling tab.
Figure 52 Scheduling
The following table describes the labels in this screen.
Table 33 Scheduling
LABEL
DESCRIPTION
Enable Wireless
LAN Scheduling
LAN Scheduling
Select this to enable Wireless LAN scheduling.
Action
Select On or Off to specify whether the Wireless LAN is turned on or off.
This field works in conjunction with the Day and Except for the
following times fields.
This field works in conjunction with the Day and Except for the
following times fields.
Day
Select Everyday or the specific days to turn the Wireless LAN on or off.
If you select Everyday you can not select any specific days. This field
works in conjunction with the Except for the following times field.
If you select Everyday you can not select any specific days. This field
works in conjunction with the Except for the following times field.
Except for the
following times
(24-Hour
Format)
following times
(24-Hour
Format)
Select a begin time using the first set of hour and minute (min) drop
down boxes and select an end time using the second set of hour and
minute (min) drop down boxes. If you have chosen On earlier for the
WLAN Status the Wireless LAN will turn off between the two times you
enter in these fields. If you have chosen Off earlier for the WLAN Status
the Wireless LAN will turn on between the two times you enter in these
fields.
down boxes and select an end time using the second set of hour and
minute (min) drop down boxes. If you have chosen On earlier for the
WLAN Status the Wireless LAN will turn off between the two times you
enter in these fields. If you have chosen Off earlier for the WLAN Status
the Wireless LAN will turn on between the two times you enter in these
fields.
Note: Entering the same begin time and end time will mean the
whole day.
Apply
Click Apply to save your changes back to the NBG-417N.
Reset
Click Reset to reload the previous configuration for this screen.