ZyXEL nbg-5715 Guida Utente
Chapter 7 Easy Mode
NBG5715 User’s Guide
52
7.5.7 WPS
Use this screen to add a wireless station to the network using WPS. Click WPS in the Wireless
Security to open the following screen.
Security to open the following screen.
Figure 29
Wireless Security: WPS
Security mode
Select WPA-PSK or WPA2-PSK to add security on this wireless network. The
wireless clients which want to associate to this network must have same wireless
security settings as this device. After you select to use a security, additional options
appears in this screen.
wireless clients which want to associate to this network must have same wireless
security settings as this device. After you select to use a security, additional options
appears in this screen.
Select No Security to allow any client to connect to this network without
authentication.
authentication.
Wireless
password
password
This field appears when you choose wither WPA-PSK or WPA2-PSK as the
security mode.
security mode.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Verify
password
password
Type the password again to confirm.
Apply
Click Apply to save your changes back to the NBG5715.
Cancel
Click Cancel to close this screen.
WPS
Click this to configure the WPS screen.
You can transfer the wireless settings configured here (Wireless Security screen)
to another wireless device that supports WPS.
to another wireless device that supports WPS.
Table 17
Wireless Security (continued)
LABEL
DESCRIPTION