ZyXEL p-660hwp Nota Di Rilascio

340APD2C0.docdoc 

( the PC using static IP 192.168.1.34 ).  
 

1.  [Enhancement]: Change “Network Password” to “Network Name” in web GUI and CI 

command. 

2.  [Enhancement]: Auto detect Intellon F/W version in our RAS code, and auto update 

Intellon F/W if current version is older than the one in RAS code.  

3. [Bugfix]: 

SPRID:071021056 

Symptom: use CI Command “sys atwz” to modify MAC address then use CI Command 
“powerline display” can not get the powerline information  

4.  [Bugfix]: SPRID :071022064  

Symptom: set nmk in GUI have problem. 
Condition:  
(1) GUI-＞Network-＞Powerline , Enter a new nmk and apply it, GUI show “INTERNAL 
ERROR”. 
(2) SMT show “set nmk successful!” 
(3) Enter GUI again ,nmk show empty. 

5.  [Bugfix]: SPRID: 071021055  

Symptom:  enable triple play and use bridge mode, bound powerline to a single PVC , pc 
linked to PLA400 can get dynamic ip from dhcp server behind the bridge PVC.   

6.  [Bugfix]: SPRID: 071021058 

Symptom: Use CI Command “powerline setnmk” to set the NMK, then use CI Command 
“powerline display” to show the nmk and the result is “unknown.”.  

7.  [Bugfix]: SPRID: 071021059 

Symptom: Use CI Command “powerline config nmk” to set the nmk,  “powerline display” 
show the nmk has been changed.  Change PLA 400’s nmk to be same with the new nmk, 
device can not connect to PLA 400. 

8.  [Bugfix]: SPRID: 071021057 

Symptom: In default configuration default “LAN multicast” is None, but on LAN side can 
receive IGMP packets.  

9.  [Bugfix]: SPRID: 071021061 

Symptom: Help page show wrong information. The content in help page is not accordant 
to the content in working page  

10.  [Bugfix]: SPRID: 071021060 

Symptom: Default firewall-＞Bypass triangle route is disabled, so traffic redirect can not 
open website  

11.   [Bugfix]: SPRID: 071102101  

Symptom: use “sys atwz” to modify mac, but can’t modify the powerline module’s mac at 
the same time. 

12.  [Bugfix]: SPRID: N/A  

Symptom: Static route remote node mode doesn’t work. 

 

Modifications in V3.40(APD.2)b1 | 10/10/2007 
1. 

[Feature Enhance]:

 Merge Intellon F/W 3.0.5 

2. 

[Feature Enhance]: Have Static routing configuration in WEB GUI, and can select 
gateway IP address mode or gateway remote node mode.

 

3. 

[Feature Enhance]: Public/Private IP (allow to have private IP going through NAT while 
global – without NAT. This is to be used with FF NAT). 

 

4. 

[Feature Enhance]: Make PAT in NAT port forwarding,  add “TCP/UDP” selection there 
too.

 

5. 

[Feature Enhance]: Add a possibility to add connections without default gateway (except 
1-st connection)