ZyXEL p-320w Guida Utente

P-320W User’s Guide

28 

Chapter 1 Getting to Know Your Prestige

The Prestige reset button is built into the rear panel. Use this button to restore the factory 
default password to 1234; IP address to 192.168.1.1, subnet mask to 255.255.255.0 and DHCP 
server enabled with a pool of 32 IP addresses starting at 192.168.1.33. 

The Prestige is a stateful inspection firewall with DoS (Denial of Service) protection. By 
default, when the firewall is activated, all incoming traffic from the WAN to the LAN is 
blocked unless it is initiated from the LAN. The Prestige firewall supports TCP/UDP 
inspection, DoS detection and prevention, real time alerts, reports and logs.

The packet filtering mechanism blocks unwanted traffic from entering/leaving your network.

The Prestige allows you to get the current time and date from an external server when you turn 
on your Prestige. You can also set the time manually. 

Using the standard TCP/IP protocol, the Prestige and other UPnP enabled devices can 
dynamically join a network, obtain an IP address and convey its capabilities to other devices 
on the network.

PPPoE facilitates the interaction of a host with an Internet modem to achieve access to high-
speed data networks via a familiar "dial-up networking" user interface.

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables secure transfer of 
data from a remote client to a private server, creating a Virtual Private Network (VPN) using a 
TCP/IP-based network.

PPTP supports on-demand, multi-protocol and virtual private networking over public 
networks, such as the Internet. The Prestige supports one PPTP server connection at any given 
time.