ZyXEL p-320w Guida Utente

P-320W User’s Guide

72 

Chapter 4 Wireless LAN

OTIST (One-Touch Intelligent Security Technology) allows your Prestige to set the wireless 
client to use the same wireless settings as the Prestige. 

Note: The wireless client must support OTIST and have OTIST enabled. 

The following are the wireless settings that the Prestige assigns to the wireless client if OTIST 
is enabled on both devices and the OTIST setup keys are the same. 

• SSID 
• Security (WEP or WPA-PSK) 

Note: This will replace the pre-configured wireless settings on the wireless clients.

You must enable OTIST on both the AP and wireless client before you start transferring 
settings.

Note: The AP and wireless client(s) MUST use the same Setup key.

You can enable OTIST using the Reset button or the web configurator. 

If you use the Reset button, the default (01234567) or previous saved (through the web 
configurator) Setup key is used to encrypt the settings that you want to transfer. 

Hold in the Reset button for one or two seconds. 

Note: If you hold in the Reset button too long, the device will reset to the factory 

defaults!

Shared Secret

Enter a password (up to 31 alphanumeric characters) as the key to be shared 

between the external authentication server and the Prestige.
The key must be the same on the external authentication server and your 

Prestige. The key is not sent over the network. 

Apply

Click Apply to save your changes back to the Prestige.

Reset

Click Reset to reload the previous configuration for this screen.

Table 25   Wireless: 802.1x and Dynamic WEP