ZyXEL 793H Guida Utente

Chapter 12 Static Route

P-793H User’s Guide

Figure 91   Static Route > Static Route

The following table describes the labels in this screen. 

Select a static route index number and click Edit. The screen shown next appears. Use this 
screen to configure the required information for a static route.

Table 59   Static Route > Static Route

#

This is the number of an individual static route.

Active

This field shows whether this static route is active (Yes) or not (No).

Name

This is the name that describes or identifies this route. 

Destination

This parameter specifies the IP network address of the final destination. Routing is 

always based on network number. 

Gateway

This is the IP address of the gateway. The gateway is a router or switch on the same 

network segment as the device's LAN or WAN port. The gateway helps forward 

packets to their destinations.

Subnet Mask

This is the subnet mask of the static route.

Modify

Click the edit icon to go to the screen where you can set up a static route on the 

ZyXEL Device.
Click the delete icon to remove a static route from the ZyXEL Device. A window 

displays asking you to confirm that you want to delete the route. 

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to begin configuring this screen afresh.