ZyXEL 793H Guida Utente

Chapter 26 Remote Node Setup

P-793H User’s Guide

Move the cursor to the Edit Advance Options field in menu 11.1 (only for remote node 1), 
then press [SPACE BAR] to select Yes. Press [ENTER]

 

to open Menu 11.8 - Advanced 

Setup Options.

Figure 159   Menu 11.8: Advance Setup Options

The following table describes the fields in this menu.

                        Menu 11.8 - Advance Setup Options

                    PPPoE pass-through= No

Table 107   Menu 11.8: Advance Setup Options

PPPoE pass-through

In addition to the ZyXEL Device's built-in PPPoE client, you can enable PPPoE 

Passthrough to allow up to ten hosts on the LAN to use PPPoE client software 

on their computers to connect to the ISP via the ZyXEL Device. Each host can 

have a separate account and a public WAN IP address.
PPPoE pass through is an alternative to NAT for applications where NAT is not 

appropriate. 
Disable PPPoE passthrough if you do not need to allow hosts on the LAN to 

use PPPoE client software on their computers to connect to the ISP.

Once you have completed filling in this menu, press [ENTER] at the message “Press ENTER to 

Confirm...” to save your configuration and return to menu 11.1, or press [ESC] at any time to cancel.