ZyXEL 793H Guida Utente

 Chapter 3 Wizards

P-793H User’s Guide

These screens let you enter the rest of the Internet settings, which depend on the encapsulation 
your Internet connection uses (and the mode you selected, for RFC1483).
This screen appears if your Internet connection uses Ethernet encapsulation.

Figure 13   Internet Setup Wizard: ISP Parameters (Ethernet)

The following table describes the fields in this screen.

This screen appears if your Internet connection uses PPPoE encapsulation.

Table 7   Internet Setup Wizard: ISP Parameters (Ethernet)

Obtain an IP 

Address 

Automatically

Select this if you have a dynamic IP address.

Static IP 

Address

Select this if you have a static (fixed) IP address, and enter the information below.

These fields appear if you select Static IP Address.

IP Address

Enter the static IP address provided by your ISP.

Subnet Mask

Enter the subnet mask provided by your ISP.

Gateway IP 

Address

Enter the IP address of the gateway provided by your ISP. If your ISP did not provide 

one, use the default value.

First DNS 

Server
Second DNS 

Server

Enter the IP address(es) of the DNS server(s) provided by your ISP. If your ISP did 

not provide one or both, use the default value(s).

Back

Click Back to go back to the previous screen.

Apply

Click Apply to finish manual configuration.

Exit

Click Exit to close the wizard screen without saving your changes.