Sharp lc-37d40u Guida Al Funzionamento
31
Now Initializing
Useful adjustment settings
Input Select
Selecting input source
Use this menu to select the input source.
Use this menu to select the input source.
Press
INPUT.
• A list of selectable sources appears.
Press
INPUT again to select the input
source.
• An image from the selected source automatically
• An image from the selected source automatically
displays.
• You can also select the input source by pressing
a/b.
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
Press a/b to select the signal type you
want to set, and then press
ENTER.
• If the selected signal type is incorrect, images
are not displayed or displayed without any color.
Selecting input signal type
For setting the signal type of external equipment
For setting the signal type of external equipment
connected to INPUT 1 or 2 terminals.
Press
MENU and the MENU screen displays.
Press c/d to select “Option”.
Press a/b to select “Input Select”, and then
press
ENTER.
NOTE
• If you set INPUT 1 and INPUT 2 to Auto, the TV will
automatically select the input signal.
• Check the operation manual of the external equipment for
the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to “Auto”
when other equipment is connected will result in the
following connection priority.
1
2
1
2
4
3
INPUT 1 and INPUT 2
1. COMPONENT VIDEO
2. VIDEO
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press c/d to select “Yes”, and then press
ENTER.
• “Now, TV will restart automatically. OK?”
• “Now, TV will restart automatically. OK?”
displays on the screen.
Press
MENU and the MENU screen displays.
Press c/d to select “Setup”.
Press a/b to select “Reset”, and then press
ENTER.
• “Return to the factory preset values” displays on
• “Return to the factory preset values” displays on
the screen.
1
2
4
3
Press c/d to select “Yes”, and then press
ENTER.
• “Now Initializing” displays on the screen and
• “Now Initializing” displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will
have returned to its original settings.
5
NOTE
• The AV MODE will be set to “STANDARD”.
• The Channel Setup settings will not be changed.
• The Language settings will not be changed.
• The Secret number settings will not be changed.
Press
MENU to exit.
6
Press
MENU to exit.
5
D40U_en_g.indd 31
2006/01/23 11:32:25