Plantronics M12 Guida Utente
e n g l i s h
3
e n g l i s h
2
I N S T A L L A T I O N S T E P S
1. Unplug your telephone’s handset cord
from the telephone base.
2. Plug your telephone’s handset cord into
the Vista amplifier handset jack ( ).
3. Connect your telephone base to the
Vista amplifier telephone jack ( ) using
the short curly cord. On your telephone
base, plug the short curly cord into the
outlet normally used for your handset.
the short curly cord. On your telephone
base, plug the short curly cord into the
outlet normally used for your handset.
4. Plug the headset cord into the Quick
Disconnect
™
(QD) module on the long curly
cord coming from the front of the amplifier.
The QD will allow you to disconnect the
headset from the amplifier when you
are not using the phone, or need to
move away from the amplifier, while
leaving your headset in place.
headset from the amplifier when you
are not using the phone, or need to
move away from the amplifier, while
leaving your headset in place.
S T E P
2
attach to
p h o n e a n d h e a d s e t
I N S T A L L A T I O N S T E P S
The Vista Amplifier requires power
to work with most phones.
to work with most phones.
1. Remove the Battery Access Door located on
the side of the amplifier by placing your
thumb on the door and pushing down.
thumb on the door and pushing down.
2. Install two AA alkaline batteries and
replace the door.
3. You will hear three “beeps“ through the
headset when the batteries are low.
S T E P
1
install
b a t t e r i es
VISTA.engl.mech 9/16/02 5:12 PM Page 2