Affirmative 7375 Guida Utente

YEStablet 7375 User Guide 

 

 
In general, how do I turn it on? 
The Suspend button is on the left side of the 7375.  Press the Suspend button momentarily, and release.  The 7375 
display will come on almost immediately.   
 
The following exceptions apply: 

 

If this is the first time you are powering on the 7375: 
- you will need to connect up the AC-DC adapter and briefly press the Suspend button. 
 
If the tablet has been left idle for many hours or days without charging and pressing the Suspend button without the 
AC-DC does not activate the tablet: 
- you will need to connect up the AC-DC adapter and briefly press the Suspend button.  
 
NOTE:  The displayed state depends on whether the tablet is being turned on from (Forced) Suspend or Power Off 
mode.  In the former, the preserved state of the tablet is displayed.  In the latter, the tablet splash (logo) screen will 
appear prior to the eventual display of the default startup (desktop) screen.  See 

for more information. 
 
How do I turn the unit off? 
You can turn off the unit by pressing the Suspend button on the left hand side of the unit.  The screen will go dark 
almost immediately, and all open applications will be retained for the next time you power on.  Do not hold on to 
the Suspend button for too long (4 seconds or more) under normal operating conditions, as this will power the unit 
off.  You may lose valuable user data and tablet information. 
 
My 7375 will not turn ON. 
Verify that you had pressed the Suspend button briefly.  Ensure that the 7375 has power.  Plug the 7375 into the AC 
power adapter that shipped with the tablet, and plug the unit into a wall outlet.  Watch the battery LED to ensure 
that it blinks slowly in Green color to indicate charging of the battery (the LED may also glow steady Green if the 
battery is fully charged).  Press the Suspend button on the left side of the tablet.  When the 7375 turns on, the 
displayed state depends on whether the tablet is being turned on from (Forced) Suspend or Power Off mode.  If you 
continue to have trouble, contact Affirmative Computer Products for support. 
  
My 7375 will not turn OFF. 
You may turn off the tablet in two ways – Suspend or Power Off (Reset).  

•  To properly enter Suspend mode, press and release the Suspend button on the left side of the 7375.  If you 

engage the Suspend button within 15 seconds of pressing it a previous time, the Suspend function will not 
occur until the 15 seconds have elapsed. 

•  If the screen remains on, you may need to perform a Power Off or Reset to shut the tablet down.  Hold the 

Suspend button in until the screen goes dark – it should take over 4 seconds.  The 7375 is now powered off.  
You will need to press the Suspend button again briefly to power the unit back on.  If you continue to have 
problems turning the tablet off, contact Affirmative Computer Products for support. 

NOTE:  The Reset/Power Off and subsequent restart of the tablet by briefly engaging the Suspend button is often 
referred to as Cold Boot of the tablet.  During this process, you may lose tablet settings or user data that have not 
been properly saved in the 7375.  To ensure that settings such as profiles, dates, etc. are properly saved, you should 
engage the Save Registries function via Start > Settings > Control Panel > Registries Save/Restore icon after you 
made any modifications.  To properly save user data, you should save the information or files to external flash 
memory, e.g., My Computer > Storage Card and its sub-folders. 
NOTE:  All settings are also automatically saved if the tablet battery level drains down – past system warnings – to 
lead to tablet shutdown.