Affirmative 7375 Guida Utente

YEStablet 7375 User Guide

 

 

Assembly Notes: 
The Mountable Cradle may be bundled with a set of lower extension brackets to offer added elegance and 
convenience in the deployment of the 7375.  Its use is optional.  This kit comprises front (A) and rear (B) brackets 
with matching screws provided.   
 
 
 
 
 
 
 
 

 

 

 

 

 

 

 

 

     

 
              

 

 
The assembly process is as follows: 
1.  Connect the applicable cables to the ports on the cradle bottom;  
2.  Attach front bracket (A) to the cradle body – flat surface facing front and 

screw holes aligned; cables routed within – and secure with 2 screws provided; 

3.  NOTE: you may store the AC-DC adapter in the front bracket cavity if you 

choose (this space may not be large enough for other adapters in general, say, 
DC-DC); 

4.  NOTE: for wall mounting, the rear bracket (B) is unnecessary; you may stop 

here and secure the assembly to the wall through the 4-6 openings available 
(screws not provided); 

5.  To mount the rear bracket, first remove and save the lower row of (2) screws 

from the rear of the cradle body; 

6.  Slip the rear bracket partially over the rear with screw holes aligned with the 

exposed holes from the previous step; make sure the cables stay properly 
routed and the lower edge snaps into matching elements on the front bracket; 

7.  Re-secure the lower row of screws onto the main body with the rear bracket 

now included. 

8.  The completed assembly is now ready for assembly onto any applicable VESA 

arms. 

 

•  The vehicle-mount stand is designed for support only.  No connectivity is offered through the stand itself, and 

there is no provision for a locking device. 

•  The height and orientation of the stand can be adjusted. 

•  The standard cradle must be used with the stand to provide connectivity and proper 

fit. 

•  The tablet can be mounted either with or without the standard protective rubber 

jacket.