Brother HL-2600CN Manuale Utente
CHAPTER 5 MAINTENANCE
5-29
5.
Clean the area where the new
Drum Cleaner is to be installed
with a cotton cloth.
Drum Cleaner is to be installed
with a cotton cloth.
Fig. 5-26
6.
Install the new Drum Cleaner into
the printer by gently placing the
brass bearings into the guides,
and then pushing the handle
down until the bearings click into
place. Ensure that the Drum
Cleaner is free to move slightly
upwards (rotating slightly around
the bearings) in the housing after
you have installed it.
the printer by gently placing the
brass bearings into the guides,
and then pushing the handle
down until the bearings click into
place. Ensure that the Drum
Cleaner is free to move slightly
upwards (rotating slightly around
the bearings) in the housing after
you have installed it.
Fig. 5-27
7.
Re-install the Drum Cleaner Cover, and then close the Top Cover.
8.
Plug the printer into the AC outlet.
9.
Press the Power button to turn on the printer.
10.
Press any of the Menu buttons (+, – , Set or Back) to set the printer Off
Line.
Line.
11.
Press + or – until “RESET MENU” appears.
12.
Press Set to proceed to the next menu level, and then press + or – until
“PARTS LIFE” appears.
“PARTS LIFE” appears.
13.
Press Set, and then press + until “120K KIT” appears.
14.
Press Set, and then press Go. The printer is now in the READY state.