Brother HL-5270DN Guida Di Rete

Control panel setup

■

IPV6

This printer is compatible with IPv6, the next generation internet protocol. If you want to use the IPv6 
protocol, visit http://solutions.brother.com for more information.

You can enable and disable the NetBIOS facility to obtain the IP address.

Ethernet link mode. AUTO allows the print server to operate in 100BASE-TX full or half duplex, or in 10BASE-T 
full or half duplex mode by auto negotiation.

100BASE-TX Full Duplex (100B-FD) or Half Duplex (100B-HD) and 10BASE-T Full Duplex (10B-FD) or Half 
Duplex (10B-HD) fix the print server link mode. This change is valid after the print server has been reset. The 
default setting is AUTO.

If you incorrectly set this value, you may not be able to communicate with your print server.

You can restore the WIRED menu settings to factory default.

See WIRED menu options on page 8-5 for detailed information of the WIRED menu option.

You can enable and disable the wireless network connection by selecting ON or OFF.

See TCP/IP on page 8-5 for more information.