Intel Desktop Board D945GBO KD945GBOKRPAK10 Manuale Utente

10 

 

Table 1 summarizes the major features of the board. 

microBTX Form Factor (10.40 inches by 10.50 inches [264.16 millimeters by 
266.70 millimeters]) 

Support for an Intel

®

 Pentium

®

 D processor in an LGA775 socket with a 1066 or 

800 MHz system bus 

•  Four 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets 
•  Support for DDR2 667 or DDR2 533 MHz DIMMs 
•  Support for up to 4 GB of system memory 

Intel

®

 945G Chipset, consisting of: 

• Intel

®

 82945G Graphics Memory Controller Hub (GMCH) 

• Intel

®

 82801GH I/O Controller Hub (ICH7DH) 

Intel

® 

GMA950 onboard graphics subsystem 

8-channel (7.1) audio subsystem with five analog audio outputs and one S/PDIF 
digital audio output (optical) using the Sigmatel* 9220/9223 audio codec 

Legacy I/O controller for diskette drive, serial, parallel, and PS/2* ports 

Support for USB 2.0 devices 

•  Eight USB ports  
•  One serial port 
•  Four Serial ATA interfaces 
•  One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support 
•  One diskette drive interface 
•  PS/2 keyboard and mouse ports 

RAID support (levels 0,1, 0+1, and 5) on the SATA interface 

IEEE-1394a controller and three IEEE-1394a connectors (one back panel 
connector, two front-panel connectors) 

Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the Intel

® 

82573L Gigabit 

Ethernet Controller 

• Intel

®

 BIOS (resident in the SPI Flash device) 

•  Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, 

and SMBIOS 

•  Two PCI Conventional* bus connectors 
•  One PCI Express* x1 bus add-in card connector 
•  One PCI Express x16 bus add-in card connector 

•  Support for PCI Local Bus Specification Revision 2.3 
•  Support for PCI Express Revision 1.0a 
•  Suspend to RAM support 
•  Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports 
•  Support for Intel

®

 Quick Resume Technology Drivers (Intel

®

 QRTD) 

continued