Intel Desktop Board D945GBO KD945GBOKRPAK10 Manuale Utente

Codici prodotto

KD945GBOKRPAK10

Product Description

ADD2/ADD2+ card can either be configured to support simultaneous display with the primary
VGA display or can be configured to support dual independent display as an extended desktop
configuration with different color depths and resolutions. ADD2/ADD2+ cards can be designed to
support the following configurations:
•  TV-Out (composite video)
•  Transition Minimized Differential Signaling (TMDS) for DVI 1.0
•  Low Voltage Differential Signaling (LVDS)
•  Single device operating in dual channel mode
•  VGA output
•  HDTV output

1.6.1.4 Configuration

Modes

A list of supported modes for the Intel GMA950 graphics controller is available as a downloadable
document.

For information about

Refer to

Supported video modes for the board

Section 1.3, page 15

1.6.2 USB

The board supports up to eight USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and
EHCI-compatible drivers.

The ICH7DH provides the USB controller for all ports. The port arrangement is as follows:
• Four ports are implemented with dual stacked back panel connectors adjacent to the audio

connectors

• Four ports are routed to two separate front panel USB connectors

NOTE

Computer systems that have an unshielded cable attached to a USB port may not meet FCC
Class B requirements, even if no device is attached to the cable. Use shielded cable that meets the
requirements for full-speed devices.

For information about

Refer to

The location of the USB connectors on the back panel

Figure 15, page 52

The location of the front panel USB connectors

Figure 16, page 54