Intel Desktop Board D945GBO KD945GBOKRPAK10 Manuale Utente

82 

 

5.  The operating system loads.  While the operating system is loading, USB keyboards and mice 

are recognized and may be used to configure the operating system. 

6.  After the operating system loads the USB drivers, all legacy and non-legacy USB devices are 

recognized by the operating system, and Legacy USB support from the BIOS is no longer used. 

To install an operating system that supports USB, follow the operating system’s installation 
instructions.   

The BIOS can be updated using either of the following utilities, which are available on the Intel 
World Wide Web site: 
•  Intel

®

 Express BIOS Update utility, which enables automated updating while in the Windows 

environment.  Using this utility, the BIOS can be updated from a file on a hard disk, a 1.44 MB 
diskette, or a CD-ROM, or from the file location on the Web. 

•  Intel

®

 Flash Memory Update Utility, which requires creation of a boot diskette and manual 

rebooting of the system.  Using this utility, the BIOS can be updated from a file on a 1.44 MB 
diskette (from a legacy diskette drive or an LS-120 diskette drive) or a CD-ROM. 

Both utilities verify that the updated BIOS matches the target system to prevent accidentally 
installing an incompatible BIOS. 

 

 

The Intel World Wide Web site 

Section 1.3, page 15 

The BIOS Setup program and help messages are supported in US English.  Additional languages 
are available in the Integrator’s Toolkit utility.  Check the Intel website for details. 

During POST, an Intel

®

 splash screen is displayed by default.  This splash screen can be augmented 

with a custom splash screen.   The Integrator’s Toolkit that is available from Intel can be used to 
create a custom splash screen. 

 

 

The Intel World Wide Web site 

Section 1.3, page 15